- 1 Top 4 Best Rosin Press Under 500 – Buying Guide
- 2 1. My Rosin Press – Editor’s Choice
- 3 2. Tuopuke Rosin Press Plates – Best Smashing Plates
- 4 3. Lilsmasher Rosin Press – The Best Machine In Versatility
- 5 4. Rosineer RNR-MV2 Manual Rosin Press Machine – A Simple Handy Machine
Top 4 Best Rosin Press Under 500 – Buying Guide
1. My Rosin Press – Editor’s Choice
While purchasing “My Rosin Press”, I considered my need. This is a small size machine that is cheap in terms of price. It is easy to maintain and use. It is the most good looking rosin press I have ever seen online. I have been using it on daily basis and it works well. It’s been a few months since I purchased it and up to now, I haven’t tackled any problem. This rosin press is small enough in size to be placed anywhere in a workshop and get started with. I came across this rosin press model when I was going through a certain forum post in search of something within my budget. This is our choice for the best rosin press under 500.
This machine is able to offer 6 Tons of pressure per square inch and it is quite enough to extract strains completely. The temperature range is 160F to 280F that is 71C to 104C. Both the plates have equal size of 3.07 inches x 3.07 inches. The rosin press machine’s plates are made up of stainless steel that is strong enough and durable for years. The weight is 12.9 lbs and in my opinion, this is one of the lightest machines, maybe. The height of the machine is 11.5 inches as it is closed but if you open the handle then it is 16 inches. The length is 10.5 inches and the width is 8.5 inches.
- The size is small that helps in keeping the machine in any corner.
- This is made up of a steel body and it looks premium.
- The heating mechanism works well and offers good quality extract.
Still, now, I haven’t experienced any demerits and if you can’t find them online then you won’t get any. This is one of the best machines that are available for an affordable price and good enough to provide the extract required. Should you decide to get a used one, then you must make sure that you inspect properly to check if it has any faults otherwise you will end up with a bad rosin press machine.
2. Tuopuke Rosin Press Plates – Best Smashing Plates
As per the increase in demand of rosin press machine, there are lots of manufacturers that are stepping into this market. You are able to purchase some of the best quality machines but there will be a time when you have to change the rosin press plates. In order to replace the previous one with new ones, you can choose other brands and find the best quality plates. If you have been looking for quality rosin press then you can try out Tuopuke Rosin Press Plates. These are made up of aluminum and you will be amazed by the fact that there are many materials available but aluminum one is best as it heats faster and affordable also.
My Personal Experience with Tuopuke Rosin Press Plates
Basically, most of the rosin press machine users face the same issue of replacing smashing plates. I had the same problem so I looked for the best ones and I decided to go with some reputed manufacturer. In the end, I got to know about Tuopuke and managed ordered it.
Once I received the product, the packaging wasn’t that fine but still, I accepted it. The rosin press plates were in the right condition. I installed it in my old machine and turned it on and tested it. The Plates were able to heat up well and after that, and since then I have been using it on a daily basis. It consumes less electricity and provides better extraction as the size of the plate is enough to perform medium size extraction. You may be thinking about how I got to know about this machine? Well, the reviews helped me find it and I decided to rate it and review it so that others can also know about this machine.
Everyone wants to purchase smashing plates that heat up faster because this can help in saving electricity and work well. Well, coming back to the features, these plates are capable of providing 415F in one minute. This is really too much and the plates are capable of generating too much heat. The pressure it can easily carry away is 20ton that is too high and helpful in working well. There is an electronic control box that can help you manage the temperature. This is a really easy and quick method to work with the plates. This means that you don’t have to use any external method to heat these plates.
These rosin press plates are beneficial in many ways and the main ones are:
- You get a dual controller to manage the heat of both plates.
- The intense force and proper heating will provide better quality extract.
- Get rosin in less time than other machines.
- It heats up internally that means it is much safer.
- If you are thinking that there may be some cons then you are wrong. Even, after checking many websites, I tackle with a single review that seemed like false so these are the best rosin press smashing plates.
3. Lilsmasher Rosin Press – The Best Machine In Versatility
It’s been just two years when this rosin was introduced on the market. Back in 2015, rosin wasn’t too popular but now, the demand is completely high and there are lots of machines available on the market. This machine is based on three things and if any of them isn’t done right then getting fine quality rosin isn’t possible. A rosin press has two smashing plates made of hard and versatile metal to press the strain, one heating mechanism to heat these plates and the last factor is the time that depends on the amount of strain. If any of these isn’t in the right amount then the taste of rosin can’t be preserved. You may know that using a solvent to extract rosin is effective but harmful so that method is no longer in use.
What Proved Beneficial to Me?
Whenever I go shopping, I have a concern about where the product is made. LilSmasher Rosin Press is made in the U.S.A. and it is a product by NugSmasher that is a reputed manufacturer. While searching for the best small size rosin press machine, I checked around for some reviews about it. All the reviews regarding this machine were positive and heartwarming. Personally, I also love it because this is easy to use and the maintenance is also easier. This machine can reach too high in PSI and the heating mechanism is good enough to provide fine quality rosin with ease. This is a hydraulic rosin machine that means there is no need to apply too much pressure. I just pull the handle down and then the machine automatically applies pressure.
This is a plug and play rosin machine that is capable of providing 6500 lbs PSI. This rosin press machine is made up of solid steel and the smash plate size is 4”x4”. Both the plates heat to give you fine quality extract and there is temperature control available so that you can manage the heat easily. The circuit is protected and the pump is a manual arm.
- The Price is worth for this rosin press machine.
- This is a complete kit so you don’t have to buy anything else.
- It heats up well and extracts rosin excellently.
- Small in shape so easy to place and maintain.
- In this price range, there are many other products similar to this and some cheap manufacturers can provide more features.
- The handle of rosin press rattles a lot. Due to this, it is a little bit tough to use but after a few days, I get used to it.
4. Rosineer RNR-MV2 Manual Rosin Press Machine – A Simple Handy Machine
After the legalization of cannabis in many states of the US and Canada, it is easy to figure out the increase in demand of rosin press to get the extraction of cannabis strain. Many manufacturers come up with some awesome machines that are made up of steel as well as other hard material that is versatile. Rosineer is one of the well-known manufacturers that are in this business from a long.
The rosin press machine manufactured by this company is simply handy and easy to use. There are many types of rosin press machines available that work on different mechanism. There are three main types of rosin press, manual, hydraulic and pneumatic press. The prices of these types vary according to type and material used in smashing plates. The size is also the factor that varies the cost.
What I loved About Rosineer RNR-MV2 Manual Rosin Press Machine?
This review is based on my experience of use. I have used many machines before that are available in this price range and find that this is most convenient to use. If you are going to use a rosin press machine on a daily basis then this is the right product for you. It works fine and I have used it for some quite a number of years. Even, I am able to use this machine for 2 to 3 hours every day.
The heating system is awesome and both the smashing plates have a heating mechanism and I have the option to decide which one to heat. Both rosin press machine plates have different buttons. I can operate then individually and I am able to manage the temperature. This helped in getting the best quality rosin manually.
The heating plates have food grade stainless steel cover that provides plant oil extraction. The specification of the rosin press machine are:
- The temperature can rise up to 750F that is 399C.
- The power required to use this machine is 700W.
- It works on 110 to 120V that is standard in Uthe SA.
- It weights around 33.07lbs.
- The dimension of this machine is 34.7 x 31.5 x 62.5cm.
- This is easy to carry and it consumes less electricity as it is a manual one.
- The individual switch for heat press will help you get proper heating.
- It is capable of providing the best quality rosin with ease.
- These are some benefits and you know that there are no cons but if you check out online then you can counter with some cons.
Personally, I haven’t tackled with these issues but I am mentioning some that can help you know more about this rosin press.
- This is manual that means you have to apply pressure externally. Sometimes this is troublesome.
- Hard to use in term of placing extra strain in rosin press and pressing on your own.
- These can be some personal problems but still, now, I am happy with the outcomes and using it well. If you are wondering rosin press for sale then visit some websites that offer used products.